Resistive wire in steel SS316L from Wireoptim, with a length of 15 meters.
Available in thicknesses of 24ga - 26ga - 27ga - 28ga: select your desired option from the drop-down menu.
Package includes 1 piece.
Made in U.S.A.
- → Shipping from 9.90 € - info
- → Do you need help? Go to the help center
- → Phone support: +39 392 122 122 8 (Mon-Fri 9:00-12:45 / 15:00-18:00 CEST)
- → Information on warranty and assistance
Wireoptim Stainless Steel 316L Rebuilding Wire - 15m
A 15-meter spool of rebuilding wire made of stainless steel (SS316L) by Wireoptim, suitable for both mouth-to-lung and direct-lung rebuildable atomizers (MTL - RDL/DL). It is manufactured in the United States with high-precision computerized machinery and is completely free of processing oils and other residues.
Available in different thicknesses to choose from:
- 24ga (0.51 mm)
- 26ga (0.40 mm)
- 27ga (0.36 mm)
- 28ga (0.32 mm)
Select the desired option from the menu above to add it to your cart.
316L Stainless Steel has higher corrosion resistance than 304 and an extremely low carbon content that minimizes the precipitation of harmful carbides during welding. It also has excellent oxidation resistance during intermittent use up to 870 °C and continuous service up to 925 °C, which are temperatures it can safely operate at.
Instructions for Use
- Cut a piece of wire of adequate length (10-15cm)
- Wrap it into coils using a coil jig, choosing the desired number of wraps and coil diameter
- Place the coil into the atomizer deck and tighten the legs with the appropriate attachment points
- Trim the excess and fill the coil with vaping cotton
- Cut to size and saturate with your desired e-liquid
- Test the coil with a few activations, reassemble the atomizer, fill the tank (if applicable), and vape
Rebuilding Tips
Read the guides on our blog:
- Rebuilding Your Electronic Cigarette: Where to Start
- Rebuilding Wire for Atomizers: How to Choose the Right One for Your E-Cigarette
Technical Specifications
- Material: Stainless Steel SS316L
- Length: 15m
- Operating Temperature: 1371-1399°C (2500-2550°F)
- Heat Treatment: Annealed (soft)
- Tensile Strength (Mpa): ? 480
Package Contents
- 1 x Wireoptim SS316L Rebuilding Wire 15m
Shop Wireoptim Rebuilding Wires on Svapoebasta
In our shop, you can find all Wireoptim rebuilding wires in spools and pre-made coils. Take a look at the complete catalog and choose the one that suits you!
- Packaging
- 1 piece
- Category
- Resistive wire
- Brand
- Wireoptim
- Difficulty
- Difficult
You might also like
Feedaty Reviews Resistive Wire SS316L Wireoptim - 15 meters
Buon filo che utilizzo in mtl nei dripper
per le mie rigenerazioni lo trovo ottimo.
Ottimo filo per lo svapo da guancia ,quello che cercavo