UD Youde Technology Regeneration Wire in Kanthal A1 - 9m
A 9.14-meter (30 ft) spool of resistance wire in Kanthal A1 by UD Youde Technology, suitable for lung rebuildable atomizers (RDL / DL).
Available in 26ga (0.40 mm) thickness.
Kanthal A1 is an alloy of Iron, Chromium, and Aluminum, with high resistivity and excellent oxidation resistance.
Instructions for Use
- Cut a piece of wire of appropriate length (10-15cm)
- Wrap it around a coil jig, choosing the number of wraps and desired coil diameter
- Place the coil in the atomizer deck and tighten the legs with the appropriate connection points
- Trim the excess wire and fill the coil with vape cotton
- Cut to size and wet with desired e-liquid
- Test the coil with a few activations, reassemble the atomizer, fill the tank (if present), and vape
Tips for Rebuilding
Read the guides on our blog:
Technical Specifications
- Material: Kanthal A1 (22% Cr - 5.8% Al - balance Fe)
- Length: 9.14m (30ft)
- Thickness: 26ga
Package Contents
- 1 x Kanthal A1 Resistance Wire UD Youde Technology 30ft
Buy UD Youde resistance wires on Svapoebasta
In the shop, you will find all the UD resistance wires on spools and pre-made coils: take a look at the complete catalog and choose the one that suits you!