Créavap Bent mechanical single battery 18350 electronic pipe
The Créavap Bent is a small handcrafted electronic pipe made of wood and metal, available in three different versions: Zebrano, Rosewood, and Walnut. It is meticulously crafted by hand, smoothing the wood to achieve a completely smooth surface that feels pleasant to the touch and visually captivating due to the natural grain of the raw material.
This device is completely devoid of protections and power regulation circuitry, therefore its use is recommended exclusively for experienced vapers who are familiar with mechanical vaping.
This pipe-shaped electronic cigarette consists of a battery body and a long acrylic drip tip, identical to those found on analog pipes, with a 510 connection for attaching an atomizer (not included in the package).
The wooden mod houses an aluminum cylinder inside to accommodate a single 18350 battery (not included in the package) that powers the device. On the bottom, there is a spring mechanism that, when the top button is pressed, closes the electrical circuit and activates the vaporization. The button is also made of aluminum, screws in, and features the Créavap logo engraved on top using laser technology.
The manufacturer declares an output voltage of 3.7V, but the actual power output depends on various parameters, such as the technical specifications of the battery used, its charge level, and most importantly, the resistance value of the atomizer coil (use coils with an impedance greater than 0.6 Ohm). If all these concepts are new to you, we strongly recommend educating yourself on them before purchasing the device, for your own safety.
The metal cup allows the use of atomizers with a 510 connector and a maximum diameter of 22mm.
Small, finely crafted, and produced in limited quantities: a true high-end masterpiece that shines in slow vaping with cheek atomizers and important tobacco flavors. Perfect for cozy evenings in front of a lit fireplace in winter or on a patio at sunset during summer.
Don't miss out on it!
Instructions for use
- Unscrew the button from the mod, insert a 18350 battery (to be purchased separately) and close it
- Screw an atomizer onto the properly regenerated 510 cup
- Insert the drip tip into the atomizer
- Vape by pressing the Fire button
Accessories and spare parts
Technical specifications
- Type: mechanical pipe
- Construction materials: wood and aluminum
- Dimensions: 40 x 54 mm
- Weight: 60g without battery
- Maximum power: 3.7V
- Battery type: 18350 (not included in the package)
- Charging port: no
- Read resistance range: > 0.6?
- Display: no
Package contents
- 1 x Bent E-pipe
- 1 x Scar Drip tip
- 1 x Protective fabric pouch
- 1 x Certificate of authenticity
Discover all Créavap electronic pipes on Svapoebasta
In the shop, you can find all the best Créavap electronic pipes, both for lung vaping and cheek vaping. Choose the one that suits you best!
