Créavap Gandalf mechanical electronic pipe single battery 18350
The Gandalf 18350 by Créavap is a handcrafted electronic pipe made of wood and metal, available in three different versions: Zebrano, Palissandro, and Noce. It is manually crafted, smoothing the wood surface to create a pleasant touch and visually appealing thanks to the natural grain patterns of the raw material.
This device is completely without protections and power regulation circuit, therefore its use is recommended exclusively for experienced vapers who are familiar with mechanical vaping management.
This pipe-shaped electronic cigarette consists of a battery body and a long acrylic drip tip, identical to those of analog pipes, with a 510 connection for installation on an atomizer (not included in the package).
The wooden "mod" contains an aluminum cylinder inside to accommodate the single 18350 battery (not included in the package) that powers the device: on the bottom, there is a spring mechanism that allows - by pressing the upper button - to close the electrical circuit and activate the vaporization. The button is also made of aluminum, it is threaded and has the Créavap logo engraved on its top.
The output voltage declared by the manufacturer is 3.7V but the developed power depends on various parameters, such as the technical specifications of the battery used, its charge level, and, above all, the resistance value of the installed atomizer coil (use coils with a resistance above 0.6 Ohm). If all these concepts are new to you, we strongly suggest you research them before purchasing the device, for your safety.
The metal cup allows the use of atomizers with a 510 connector and a maximum diameter of 22mm.
Precious, finely crafted, and produced in limited quantities: a true high-end masterpiece that shines in slow vaping with cheek atomizers and important tobaccos. In the evening, on the couch in front of a lit fireplace in winter or on the patio at sunset in summer.
Don't miss out on it!
Instructions for use
- Unscrew the button from the mod, insert a 18350 battery (to be purchased separately), and close it
- Screw an atomizer onto the properly regenerated 510 cup
- Insert the drip tip into the atomizer
- Vape by pressing the Fire button
Accessories and spare parts for Gandalf X
Technical specifications
- Type: mechanical pipe
- Construction materials: wood and aluminum
- Dimensions: 33 x 59 mm
- Weight: 48g (bowl only, without battery)
- Maximum power: 3.7V
- Battery type: 18350 (not included in the package)
- Charging port: no
- Read resistance range: > 0.6?
- Display: no
Package contents
- 1 x Gandalf 18350 E-pipe
- 1 x Churchwarden 5" Drip Tip
- 1 x Protective fabric bag
- 1 x Certificate of authenticity
Discover all the Créavap electronic pipes on Svapoebasta
In the shop, you can find all the best Créavap electronic pipes, both for lung vaping and cheek vaping. Choose the one that suits you best!
