Rainbow Six Multicore pre-made coils Breakill's Alien Lab line Bullets for extreme cloud chasing (DL), only for experienced vapers.
Ready-made coils made with 5 wraps on a 3mm complex wire in Ni80: suggested usage in dual coil with a total resistance value of 0.09? (140-180W) on a 21700 box or with high discharge (30C) 18650 batteries and on 24 to 28mm RDA atomizers.
Complete aromatic spectrum and highreactivity are guaranteed by a Core composed of 6 wires and a well-balanced Wrap.
Breakill's Alien Lab Rainbow Six Multicore Bullets Ready for Dual Coil - DL Dripper +30mm
The Rainbow Six Multicore from the Bullets line by Breakill's Alien Lab are premade coils for cloud chasing to be used on 21700 or 18650 electronic systems (with high discharge 30C batteries) in both single and dual battery configurations on 24mm to 28mm RDA atomizers.
These large-sized complex coils are made with 5 wraps of Nichrome 80 wire on a 3mm rod and have a resistance value of approximately 0.09 Ohm when used in pairs. The manufacturer suggests a wattage range of 140-180W for dual coil setups.
These coils generate a copious amount of vapor thanks to the large vaporizing surface area and offer a wide-spectrum flavor production, while ensuring great responsiveness. The complex structure consists of a 6-wire Core and a balanced Wrap. For a durable lifespan (250-400ml of e-liquid), it is recommended to perform a dry burn every 25-30ml.
The coils are sold in an attractive bullet-shaped metal packaging and come in a set of 2 coils.
Technical Specifications
Inhale Type: Direct Lung (DL)
Material: Ni80
Number of Wraps: 5
Inner Diameter: 3mm
Resistance Value: 0.09? in dual coil
Wattage Range: 140-180W in dual coil
Recommended Atomizers: 24mm and above dual coil RDAs, 21700/18650 box mods (with high discharge 30C batteries)
Dry Burn: every 25-30ml
Estimated Lifespan: 250-400ml
Instructions for Use
Place the two coils in the atomizer deck
Tighten the coil legs at the designated anchor points
Trim the excess wire with pliers
Perform a few dry activations at a low wattage (half of the recommended) before inserting the cotton, and ensure that the coils heat up evenly (see tutorial)
Place a generous amount of cotton inside the coils and cut it to size, positioning it properly
Moisten the cotton with e-liquid and perform a few coil activations to check for proper functioning
Close the atomizer and refill with e-liquid (for tanks)
Maintenance: Perform a dry burn (firing without cotton) every 25-30ml of vaporized e-liquid
Package Contents
2 x Rainbow Six Multicore Coils by Breakill's Alien Lab
1 x Metal Packaging
All Breakill's Alien Lab premade coils are available on Svapoebasta
On Svapoebasta, you can buy these and many other premade Breakill coils for rebuildable atomizers online.