Tomcat Bigass Bullets Breakill's Alien Lab Coil Prefatte

Tomcat Bigass Bullets Breakill's Alien Lab Coil Prefatte DL - 2 Pezzi

Breakill's Alien Lab
BKAL0029
€15.50
Tax included

Tomcat Bigass prefabricated coil Breakill's Alien Lab line Bullets for extreme cloud chasing (DL), only suitable for experienced vapers.

Ready-made coils made with 9 wraps on a 3.5mm complex wire in Ni80: suggested use in dual coil with a total resistance value of 0.34? (160-200W) on mechanical systems with stacked/series batteries and RDA atomizers 25mm and above.

Maximum vapor production.

Packaged in a metal case with 2 pieces.

Handcrafted product made in Italy.

 

Breakill's Alien Lab Bullets Tomcat Bigass Ready-made Resistors for Dual Coil - DL Dripper +30mm

The Tomcat Bigass from the Bullets line by Breakill's Alien Lab are ready-made resistors for cloud chasing to be used on mechanical systems with series batteries and on drippers with a minimum diameter of 25mm, exclusively for experienced vapers.

These large-sized resistors (slightly more contained than the Fat Man model) are made with 9 windings of wire in Nichrome 80 on a 3.5mm tip and have a resistance value of approximately 0.34 Ohm when used in pairs. The manufacturer's suggested wattage range for dual coil is 160-200W.

These resistors generate an immense amount of dense, persistent, and abundant vapor, guaranteeing a full and creamy aromatic yield. For a long lifespan (up to 400-700ml of liquid), it is recommended to perform a dry burn every 40-50ml.

The bullet-shaped metal package contains 2 coils.

Technical Specifications

  • Inhale type: lung (DL)
  • Material: Ni80
  • Number of windings: 9
  • Internal diameter: 3.5mm
  • Resistance value: 0.34? in dual coil
  • Wattage range: 160-200W in dual coil
  • Suggested atomizers: dual coil RDA of at least 25mm / box with series batteries
  • Dry burn: every 40-50ml
  • Estimated lifespan: 400-700ml

TOMCAT bigass resistenze prefatte da polmone breakill alien lab

Instructions for Use

  • Place the two coils in the atomizer deck
  • Tighten the resistor legs in the appropriate anchor points
  • Trim the excess with wire cutters
  • Perform several dry activations at a low wattage (half of the recommended wattage) before inserting the cotton and verify that the glow of the windings is uniform (see tutorial)
  • Place a generous amount of cotton inside the coils and cut it to size, positioning it properly
  • Moisten the cotton with liquid and perform a few activations of the coil to verify its correct functioning
  • Close the atomizer and refill the liquid (for tanks)
  • Maintenance: perform a dry burn (dry activation without cotton) every 40-50ml of vaporized liquid

Package Contents

  • 2 x Tomcat Bigass Coil Breakill's Alien Lab
  • 1 x Metal package

img

All Breakill's Alien Lab ready-made resistors are available on Svapoebasta

On Svapoebasta you can buy these and many other Breakill ready-made resistors for rebuildable atomizers online.

Packaging
2 pieces
Category
Prefabricated coil
Brand
Breakill's Alien Lab
Typology
Standard
Difficulty
Difficult
Type of Shot
Lung (DL)
Diameter
3.5 mm
Line
Breakill's Alien Lab - Bullets
Material
Ni80 (Nichrome)
No reviews

You might also like

Feedaty Reviews Tomcat Bigass Bullets Breakill's Alien Lab Coil Prefatte DL - 2 Pezzi

There are no reviews

Oppure contatta il nostro Staff qui.

Centro Assistenza

Svapoebasta Pro - Ingrosso Sigarette Elettroniche e prodotti svapo

Domande Frequenti Sulla Puff Usa e Getta

Sito Autorizzato dai Monopoli di Stato

migliori sigarette elettroniche




Product added to wishlist