Sniper Multicore pre-built coils Breakill's Alien Lab line Bullets for cheek vaping (MTL).
Ready-made resistances made with 5 wraps on a 2.5mm complex wire in Ni80: resistive value 0.75? (17-19W).
Extremely versatile aromatic yield that separates individual flavors well, ideal with all types of e-liquid; it cools quickly and prevents deck overheating.
The Sniper Multicore from the Bullets line by Breakill's Alien Lab are ready-made resistors for MTL ideal to use on standard-size (19-24mm) cheek rebuildable atomizers, both Boro and RTA and RDTA.
These complex coils are made with 5 windings of Nichrome 80 wire on a 2.5mm tip and have a resistive value of approximately 0.75 Ohm. The recommended usage range by the manufacturer is 17-19W.
Ideal coil for all types of liquids, it has the peculiarity of separating the flavors of the various ingredients with energetic delivery and very rapid cooling. For a long lifespan, frequent maintenance of the coil is recommended, with a dry burn every 5-10ml.
The Sniper Multicore resistors are sold in an attractive metal packaging shaped like a bullet that contains 2 coils.
Technical Characteristics
Draw type: cheek (MTL)
Material: Ni80
Number of windings: 5
Inner diameter: 2.5mm
Resistive value: 0.75?
Wattage range: 17-19W
Recommended atomizers: 19-24mm RTA and RDTA - Boro Tank
Dry burn: every 5-10ml
Estimated lifespan: 80-120ml
Instructions for Use
Place the coil in the deck of the rebuildable atomizer
Tighten the two resistor legs in the appropriate anchor points
Cut off the excess with wire cutters
Perform a few dry activations at a low wattage (half of the recommended wattage) before inserting the cotton and check that the glowing of the windings is uniform (see tutorial)
Place a very abundant wick of cotton inside the coil and cut to size, positioning it properly
Moisten the cotton with liquid and perform a few activations of the coil to verify its correct operation
Close the atomizer and refill with liquid
Maintenance: perform a dry burn (dry activation without cotton) every 5-10ml of vaporized liquid
Package Contents
2 x Sniper Multicore Coil Breakill's Alien Lab
1 x Metal packaging
Buy ready-made Alien coils at Svapoebasta
In the shop you will find these and many other ready-made resistors for your electronic cigarette: take a look at the complete catalog and choose the ones that are most suitable for your vaping!
