Defcon One Ultranano Bullets Breakill's Alien Coil Prefatte MTL - 2 Pieces
Breakill's Alien Lab
BKAL0003
€15.90
Tax included
Defcon One Ultranano pre-made coils from Breakill's Alien Lab Bullets line for cheek vaping (MTL).
Ready-made resistances made with 6 wraps on a 2.5mm complex wire in Ni80: resistance value 0.9-1.0? (16-18W).
Perfect to use with electronic mods and in slow vape, excellent flavor production with all types of e-juice.
Metal packaging containing 2 pieces.
Handmade product made in Italy.
- → Shipping from 9.90 € - info
- → Do you need help? Go to the help center
- → Phone support: +39 392 122 122 8 (Mon-Fri 9:00-12:45 / 15:00-18:00 CEST)
- → Information on warranty and assistance
Breakill's Alien Lab Bullets Defcon One Ultranano Ready-made Resistors 1 Ohm - MTL Tank
The Defcon One Ultranano from the Bullets line by Breakill's Alien Lab are ready-made resistors designed for use on a cheek regenerable atomizer such as Tank, RDTA, and regular-sized immersion Boro (20-22-24mm).
These complex coils are made with 6 wraps of Nichrome 80 wire on a 2.5mm tip and have a resistance value of about 0.9-1.0 Ohm. The manufacturer's recommended wattage range is 16-18W.
The Defcon coils are perfect for enthusiasts of electronic box mods and guarantee a delicate output and good versatility with any type of e-juice on most MTL tanks, without excessively overheating the vaporization chamber.
The Defcon One Ultranano resistors are sold in a striking bullet-shaped metal package that contains 2 coils.
Technical Specifications
- Draw type: cheek (MTL)
- Material: Ni80
- Number of wraps: 6
- Internal diameter: 2.5mm
- Resistance value: 0.9-1.0?
- Wattage range: 16-18W
- Recommended atomizers: RTA and RDTA (20-24mm) - Boro Tank
- Dryburn: every 4-10ml
- Estimated lifespan: 80-120ml
Instructions for Use
- Place the coil in the deck of the regenerable atomizer
- Tighten the two legs of the resistor in the appropriate anchor points
- Trim the excesses with wire cutters
- Perform a few dry activations at a low wattage (half of the recommended wattage) before inserting the cotton and ensure that the glow of the wraps is uniform
- Place a generous amount of cotton inside the coil and cut it to size, positioning it properly
- Moisten the cotton with the liquid and perform a few coil activations to verify its correct operation
- Close the atomizer and refill the liquid
- Maintenance: perform a dryburn (dry activation without cotton) every 4-10ml of vaporized liquid
Package Contents
- 2 x Defcon One Ultranano Coil Breakill's Alien Lab
- 1 x Metal package
Buy complex coils on Svapoebasta
In the shop, you can find these and many other ready-made resistors for electronic cigarettes made with complex resistive wires: take a look at the complete catalog and choose the ones that are most suitable for your vaping!
- Packaging
- 2 pieces
- Category
- Prefabricated coil
- Brand
- Breakill's Alien Lab
- Typology
- Standard
- Difficulty
- Difficult
- Type of Shot
- Cheek (MTL)
- Diameter
- 2.5 mm
- Line
- Breakill's Alien Lab - Bullets
- Material
- Ni80 (Nichrome)
No reviews
You might also like
Feedaty Reviews Defcon One Ultranano Bullets Breakill's Alien Coil Prefatte MTL - 2 Pieces
There are no reviews