Raid Triple Core Bullets Breakill's Alien Lab Coil Prefatte MTL - 2 Pezzi
Breakill's Alien LabRaid Triple Core pre-built coil for Breakill's Alien Lab line Bullets for cheek vaping (MTL).
Ready-made resistances for rebuildable atomizers, made with 5 wraps on 2.5mm complex wire in Ni80: resistance value 0.8-0.9? (16-18W).
Maximum versatility in aromatic yield, excellent with all types of e-liquid.
Package in metal of 2 pieces.
Handmade product made in Italy.
- → Shipping from 9.90 € - info
- → Do you need help? Go to the help center
- → Phone support: +39 392 122 122 8 (Mon-Fri 9:00-12:45 / 15:00-18:00 CEST)
- → Information on warranty and assistance
Breakill's Alien Lab Bullets Raid Triple Core 0.9 Ohm Ready-made Coils - MTL Tank
The Raid Triple Core coils from the Bullets line by Breakill's Alien Lab are the 2.5mm version of the Stealth, designed for use on cheek-type rebuildable atomizers such as Tanks, RDTAs, and regular-sized Boro immersion atomizers (20-22-24mm).
These complex coils are made with 5 wraps of Nichrome 80 wire on a 2.5mm rod and have a resistance value of approximately 0.8-0.9 Ohm. The recommended wattage range from the manufacturer is also 16-18W.
The Raid coils offer optimal flavor production with all types of e-liquids and provide a perfect balance between activation responsiveness and separation of various flavors within a blend. This results in a very faithful flavor reproduction.
These ready-made coils are sold in an eye-catching bullet-shaped metal packaging that contains 2 coils.
Technical Specifications
- Inhalation type: MTL (mouth-to-lung)
- Material: Ni80
- Number of wraps: 5
- Inner diameter: 2.5mm
- Resistance value: 0.8-0.9?
- Wattage range: 16-18W
- Recommended atomizers: RTA and RDTA (20-24mm) - Boro Tank
- Dryburn: every 4-10ml
- Estimated lifespan: 80-120ml
Instructions for Use
- Position the coil in the deck of the rebuildable atomizer
- Tighten the two legs of the coil in the appropriate anchor points
- Trim the excess with wire cutters
- Perform a few dry activations at a low wattage (half of the recommended wattage) before inserting the cotton and verify that the coils glow evenly
- Place a generous amount of cotton inside the coil and cut it to size, positioning it properly
- Moisten the cotton with e-liquid and perform a few coil activations to verify its proper functioning
- Close the atomizer and refill with e-liquid
- Maintenance: perform a dryburn (dry activation without cotton) every 4-10ml of vaporized e-liquid
Package Contents
- 2 x Raid Triple Core Coils by Breakill's Alien Lab
- 1 x Metal packaging
Buy complex coils on Svapoebasta
In the shop, you can find these and many other ready-made coils for electronic cigarettes made with complex resistance wires: take a look at the complete catalog and choose the ones that are most suitable for your vaping experience!
- Packaging
- 2 pieces
- Category
- Prefabricated coil
- Brand
- Breakill's Alien Lab
- Typology
- Standard
- Difficulty
- Difficult
- Type of Shot
- Cheek (MTL)
- Diameter
- 2.5 mm
- Line
- Breakill's Alien Lab - Bullets
- Material
- Ni80 (Nichrome)
You might also like
Feedaty Reviews Raid Triple Core Bullets Breakill's Alien Lab Coil Prefatte MTL - 2 Pezzi
There are no reviews