Surgical Strike Stapled Bullets Breakill's Alien Lab Coil Prefatte
Surgical Strike Stapled Breakill's Alien Coil ready
Surgical Strike Stapled Bullets Breakill's Alien Lab Coil Prefatte
Surgical Strike Stapled Breakill's Alien Coil ready

Surgical Strike Stapled Bullets Breakill's Alien Coil Prefatte MTL - 2 Pieces

Breakill's Alien Lab
BKAL0002
€15.90
Tax included

Surgical Strike Stapled prefatte coil Breakill's Alien Lab line Bullets for cheek vaping (MTL).

Ready-made resistances made with 6 turns on a 2mm complex wire in Ni80: resistance value 0.75? (16-18W).

Excellent aromatic yield with dry tobaccos and delicate mixtures.

Metal packaging of 2 pieces.

Handcrafted product made in Italy.

 

Breakill's Alien Lab Surgical Strike Stapled Bullets Ready Resistors 0.75? - MTL BF

The Surgical Strike Stapled from the Bullets line by Breakill's Alien Lab are premade resistors for MTL ideal for use on small-sized (14-18mm) cheek rebuildable atomizers, both BF and RTA, but also on immersion-type Boro atomizers.

These complex coils are made with 6 wraps of Nichrome 80 wire on a 2mm rod and have a resistance value of approximately 0.75 Ohm. The recommended usage range by the manufacturer is 16-18W.

Coil designed to maximize the aromatic yield of single dry tobaccos and delicate blends, as it is capable of perceiving each ingredient of the blend in a detached way. For a long lifespan, frequent coil maintenance is recommended, with a dry burn every 3-8ml.

The Surgical Strike Stapled resistors are sold in an evocative bullet-shaped metal packaging that contains 2 coils.

Technical Specifications

  • Inhale type: cheek (MTL)
  • Material: Ni80
  • Number of wraps: 6
  • Internal diameter: 2mm
  • Resistance value: 0.75?
  • Wattage range: 16-18W
  • Recommended atomizers: 14-18mm RTA and BF - Boro Tank
  • Dry burn: every 3-8ml
  • Estimated lifespan: 80-100ml

Surgical Strike Stapled breakills alien coil complesse

Instructions for Use

  • Place the coil in the rebuildable atomizer deck
  • Tighten the two legs of the resistor in the appropriate anchor points
  • Cut off the excess with wire cutters
  • Perform several dry activations at a low wattage (half of the suggested one) before inserting the cotton and verify that the glow of the wraps is uniform
  • Place a generous amount of cotton inside the coil and cut to size, positioning it properly
  • Moisten the cotton with the liquid and perform a few coil activations to verify its correct functioning
  • Close the atomizer and refill the liquid
  • Maintenance: perform a dry burn (dry activation without cotton) every 3-8ml of vaporized liquid

Package Contents

  • 2 x Surgical Strike Stapled Coil Breakill's Alien Lab
  • 1 x Metal packaging

img

Buy premade Alien coils on Svapoebasta

In the shop, you can find these and many other ready-made resistors for your electronic cigarette: take a look at the complete catalog and choose the ones that are most suitable for your vaping experience!

Packaging
2 pieces
Category
Prefabricated coil
Brand
Breakill's Alien Lab
Typology
Standard
Difficulty
Difficult
Type of Shot
Cheek (MTL)
Diameter
2 mm
Line
Breakill's Alien Lab - Bullets
Material
Ni80 (Nichrome)
No reviews

You might also like

Feedaty Reviews Surgical Strike Stapled Bullets Breakill's Alien Coil Prefatte MTL - 2 Pieces

There are no reviews

Oppure contatta il nostro Staff qui.

Centro Assistenza

Svapoebasta Pro - Ingrosso Sigarette Elettroniche e prodotti svapo

Domande Frequenti Sulla Puff Usa e Getta

Sito Autorizzato dai Monopoli di Stato

migliori sigarette elettroniche




Product added to wishlist