Pioneer S electronic cigarette atomizer by BP Mods for cheek vaping and RDL.
Diameter 22mm, two 510 drip tips, 510 connection and adjustable airflow with AFC ring. Available in Short 2.5ml or Long 4ml version, both with top refill: select the desired model from the menu.
The atomizer includes two proprietary coils BP Mods TMD Coil (0.55 and 1.05 Ohm), but it is also compatible with some models of Voopoo PnP Coil and Vaporesso GTX: see specifications below.
- → Shipping from 9.90 € - info
- → Do you need help? Go to the help center
- → Phone support: +39 392 122 122 8 (Mon-Fri 9:00-12:45 / 15:00-18:00 CEST)
- → Information on warranty and assistance
BP Mods Pioneer S electronic cigarette atomizer for cheek and lung vaping
The Pioneer S by BP Mods is a electronic cigarette atomizer with a diameter of 22mm that offers a wide range of options for vaping, from a tight cheek draw to a more open and flavorful RDL (restricted direct lung) draw. Thanks to the AFC (airflow control) ring, it is possible to select individual air holes or use two large slots.
The atomizer is available in two versions, identical in every aspect except for the tank capacity: the Short model can hold up to 2.5ml of e-liquid, while the Long version can hold up to 4ml. The Pioneer S comes with two different drip tips, one suitable for MTL (mouth-to-lung) vaping and the other for DTL (direct-to-lung) vaping.
The only difference between the two models is in their dimensions: both have a diameter of 22mm but slightly different heights (Short 55mm and Long 60mm). The tank is made of PCTG, a material that makes the tank transparent and virtually unbreakable and lightweight, while the body of the device is made of stainless steel.
The e-liquid refill is top-fill, with a quarter turn rotation to open the top cap. To disassemble the bell/chimney section, simply unscrew the two screws located inside.
The atomizer comes with two TMD BP Mods coils included: 0.55? (28-35W), for airy RDL vaping with large vapor production, and 1.05? (10-13.5W) for MTL vaping with a more restricted draw and less vapor. However, the Pioneer S is compatible with some models of GTX Vaporesso coils (all wide cylindrical ones with a resistance value below 0.6 Ohm, as well as the GTX RBA) and PnP Voopoo coils (VM, TR, TM, and RBA), allowing for maximum customization of your vaping experience.
Eccentric, elegant, and highly compatible: fundamental characteristics for appealing to a wide range of users.
Instructions for use
- Unscrew the bottom part of the atomizer
- Moisten the cotton of the coil with the desired liquid and insert it under the tank
- Close the bottom part of the device
- Rotate the top cap by 1/4 turn to access the refill compartment
- Refill the liquid tank, making sure to keep the air holes closed in the AFC ring
- Close the top cap and screw the atomizer onto a box mod with a 510 connection
- Wait at least 5 minutes before use, so that the cotton of the coil is well saturated
- Select the desired airflow and install the corresponding drip tip (MTL or RDL)
- Set the correct wattage on the mod based on the coil head used
- Vape
Accessories and spare parts for Pioneer S atomizer
- TMD Coil Resistances
- Vaporesso GTX Coil Resistances (only the wide-shaped ones with a resistance value lower than 0.6? and GTX RBA)
- Voopoo PnP Coil Resistances (only wide-shaped models of the TM, TR, VM, and PnP RBA series)
Technical specifications of Pioneer S atomizer
- Type: coil head atomizer
- Draw type: mouth-to-lung (MTL) and restricted direct lung (RDL)
- Construction materials: stainless steel and PCTG
- Diameter: 22mm
- Height: Short model 55mm - Long model 60mm
- Liquid capacity: 2.5/4ml
- Liquid refill: top fill
- Drip tip: 510
- Connector: 510
- Included coils: TMD 0.55 - 1.05 Ohm
- Compatible coils: BP Mods TMD - Vaporesso GTX - Voopoo PnP
- Airflow adjustment: AFC ring
Package content
- 1 x Pioneer S Atomizer
- 1 x MTL Drip Tip
- 1 x RDL Drip Tip
- 1 x TMD Coil 0.55?
- 1 x TMD Coil 1.05?
- 1 x Spare Parts
- 1 x User Manual
Buy BP Mods atomizers on Svapoebasta
Take a look at the BP Mods atomizers available in the vaping shop and choose the perfect one for your e-cigarette!
- Liquid Capacity
- 2.5 ml
4 ml - Category
- Atomizers
- Drip Tip
- It seems that you have only provided the number "510". Can you please provide the text that you would like to be translated from Italian to English?
- Brand
- BP Mods
- Typology
- Tank with Resistors
- Difficulty
- Middle
- Type of Shot
- Cheek (MTL)
Lung (DL) - Diameter
- 22 mm (Italian to English)
- Air regulation
- Adjustable shot
- Tank filling
- From above
- Type of Resistors
- Interchangeable head coil
Compatibilità
Buongiorno vorrei sapere con quale coil della voopoo x mtl è compatibile!
Recensione Feedaty
Ottimo prodotto perfetto ed economico come in descrizione
You might also like
Feedaty Reviews Pioneer S BP Mods Atomizer 22mm
Ancora non utlizzato.mi riservo di fare successivamente una valutazione. Le 5 stelle al momento solo per la forma estetica.
Ottimo prodotto perfetto ed economico come in descrizione