Dual Core Classic Breakill's Alien Lab Coil Prefatte Open DL - 2 Pezzi
Breakill's Alien LabDual Core pre-made coil from Breakill's Alien Lab Classic line for lung vaping (open DL).
Ready-made resistors for rebuildable atomizers made with 5 wraps of complex wire in Ni80 on a 3mm post, available in two versions to choose from (0.11 or 0.14 Ohm): select the model you prefer from the dropdown menu.
The 0.11? coil is designed for RDA and RTA dual coil for DL (>24mm), while the 0.14? coil is for RDA and RTA for DL and RDL (single and dual coil 22-24mm): both are intended to be used in pairs, as this is when they perform at their best.
Metal packaging with 2 pieces.
Handcrafted product made in Italy and designed for a first approach to the world of pre-made resistors.
- → Shipping from 9.90 € - info
- → Do you need help? Go to the help center
- → Phone support: +39 392 122 122 8 (Mon-Fri 9:00-12:45 / 15:00-18:00 CEST)
- → Information on warranty and assistance
Breakill's Alien Lab Classic Dual Core Ready-made 3mm Resistors - DL
The Dual Core Classic by Breakill's Alien Lab are ready-made resistors designed for use on lung rebuildable atomizers (cloud chasing) and ideal for those who want to try this type of resistors for the first time: the affordable price and their versatility allow for a more carefree use of the product compared to the Bullets line.
These complex coils are available in two different versions, both made with 5 wraps of complex wire in Ni80 on a 3mm tip:
- Dual Core Cloud Alien 0.11? (90-120W dual): suitable for RDA and RTA dual coil atomizers for DL (>24mm)
- Dual Core Cloud Alien 0.14? (70-100W dual): suitable for RDA and RTA atomizers for DL and RDL (single and dual coil 22-24mm)
Select the ones you want from the drop-down menu above.
These ready-made resistors are sold in an attractive metal packaging that contains 2 coils.
Technical Features Dual Core Alien 0.11 Ohm
- Inhalation type: lung (DL)
- Material: Ni80
- Number of wraps: 5
- Inner diameter: 3mm
- Resistance value: 0.11?
- Wattage range: 90-120W in dual coil
- Suggested atomizers: RDA and RTA dual coil for DL (>24mm)
- Dryburn: every 30ml
- Estimated lifespan: 300ml

Technical Features Dual Core Alien 0.14 Ohm
- Inhalation type: lung (DL)
- Material: Ni80
- Number of wraps: 5
- Inner diameter: 3mm
- Resistance value: 0.14?
- Wattage range: 70-100W in dual coil
- Suggested atomizers: RDA and RTA for DL and RDL (single and dual coil 22-24mm)
- Dryburn: every 20ml
- Estimated lifespan: 300ml

Instructions for Use
- Place the coil in the deck of the rebuildable atomizer
- Tighten the two resistor legs in the appropriate anchor points
- Cut off the excess with wire cutters
- Perform a few dry activations at a low wattage (half of the suggested wattage) before inserting the cotton and check that the glow of the wraps is uniform
- Place a generous amount of cotton inside the coil and cut to size, positioning it properly
- Moisten the cotton with liquid and perform a few coil activations to check its proper functioning
- Close the atomizer and refill the liquid
- Maintenance: perform a dryburn (dry activation without cotton) every 20/30ml of vaporized liquid
Package Contents
- 2 x Dual Core Classic Flavour Coil Breakill's Alien Lab
- 1 x Metal packaging

Buy complex coils on Svapoebasta
In the shop you can find these and many other ready-made resistors for electronic cigarettes made with complex resistive wires: take a look at the complete catalog and choose the ones that are most suitable for your vaping!
- Packaging
- 2 pieces
- Category
- Prefabricated coil
- Brand
- Breakill's Alien Lab
- Typology
- Standard
- Difficulty
- Difficult
- Type of Shot
- Lung (DL)
- Diameter
- 3 mm
- Line
- Breakill's Alien Lab - Classic
- Material
- Ni80 (Nichrome)
You might also like
Feedaty Reviews Dual Core Classic Breakill's Alien Lab Coil Prefatte Open DL - 2 Pezzi
Ottimo prodotto lo consiglio anche per chi è alle prime svapate







