Créavap Gandalf X mechanical single battery 18650 electronic pipe
The Gandalf X by Créavap is a handmade electronic pipe crafted from wood and metal, available in three different versions: Zebrano, Palissandro, and Noce. It is meticulously crafted by hand, with the wood being planed until it achieves a smooth surface that is pleasing to the touch and visually captivating thanks to the natural grain of the raw material.
This device is completely without protections and power regulation circuit, therefore its use is recommended exclusively for experienced vapers who are proficient in handling mechanical vaping.
This pipe-shaped electronic cigarette consists of a battery body and a long acrylic drip tip, identical to those found on analog pipes, with a 510 connection for installation on an atomizer (not included in the package).
The wooden "mod" encloses an aluminum cylinder inside it to accommodate the single 18650 battery (not included in the package) that powers the device: at the bottom, there is a spring mechanism that allows - by pressing the top button - to close the electrical circuit and activate the vaporization. The button itself is also made of aluminum, it is threaded and has the Créavap logo engraved on its top using laser technology.
The output voltage declared by the manufacturer is 3.7V, but the developed power depends on various parameters, such as the technical specifications of the battery used, its charge level, and, above all, the resistance value of the coil installed in the atomizer (use coils with an impedance higher than 0.3 Ohm). If all these concepts are new to you, we strongly recommend that you educate yourself on the subject before purchasing the device, for your own safety.
The metal cup allows the use of atomizers with a 510 connector and a maximum diameter of 22mm.
Precious, finely crafted, and produced in limited quantities: a true high-end masterpiece that shines in slow vaping with cheek atomizers and premium tobaccos. In the evening, on the couch in front of a winter fireplace or on the patio at sunset in the summer.
Don't let it slip away!
Instructions for use
- Unscrew the button from the mod, insert a 18650 battery (to be purchased separately) and close it
- Screw an atomizer onto the properly regenerated 510 cup
- Insert the drip tip into the atom
- Vape by pressing the Fire button
Accessories and spare parts for Gandalf X
Technical specifications
- Type: mechanical pipe
- Construction materials: wood and aluminum
- Dimensions: 34 x 86 mm
- Weight: 126g with battery
- Maximum power: 3.7V
- Battery type: 18650 (not included in the package)
- Charging port: no
- Read resistance range: > 0.3?
- Display: no
Package contents
- 1 x Gandalf X E-pipe
- 1 x Churchwarden 8" Drip Tip
- 1 x Protective fabric bag
- 1 x Certificate of authenticity
Discover all the Créavap electronic pipes on Svapoebasta
In the shop you will find all the best Créavap electronic pipes, both for lung vaping and cheek vaping. Choose the one that suits you best!
