Interlock Fralien DL pre-made coils from Breakill's Alien Lab Limited Edition 2023 line for direct lung vaping (DL), suitable for experienced vapers only.
Ready-made coils made with 5 wraps on a 2.5mm complex wire in Ni80: suggested for use in dual coil with a total resistance value of 0.14? (90-100W) on flavor-chasing RTA/RDA atomizers like Cabeo, Corona, Hadaly, and on cloud-chasing models like the Goon (and similar). Can also be used in single coil with a resistance value of 0.28? (50-70W) on RDL RTA and RDA atomizers.
The wrap made with the Interlock Alien technique provides great durability over time and energetic and defined flavor production.
The Interlock Fralien DL from the Limited Edition 2023 line by Breakill's Alien Lab are ready-to-use resistors for flavour and cloud chasing to be used in both single and dual coil on RTA and RDA atomizers.
These compact complex coils are made with 5 wraps of Nichrome 80 wire on a 2.5mm rod and have a resistance value of approximately 0.28 Ohm each, which halves to 0.14 Ohm when used in pairs. The suggested wattage range for single coil is 50-70W, while for dual coil it is 90-100W.
Thanks to the Interlock Alien wrapping, the coil has a very long lifespan, while the typical Fralien structure offers great balance and high aromatic definition, as well as dense, persistent, and accommodating vapor production.
For a long-lasting lifespan (350-500ml of e-liquid), it is recommended to perform a dry burn every 20-30ml.
Each pack contains 2 coils.
Technical Specifications
Inhalation type: Direct Lung (DL)
Material: Ni80
Number of wraps: 5
Inner diameter: 2.5mm
Resistance value: 0.28? in single coil - 0.14? in dual coil
Wattage range: 50-70W in single coil - 90-100W in dual coil
Recommended atomizers: RDA and RDL RTA single coil - dual coil
Dry burn: every 20-30ml
Estimated lifespan: 350-500ml
Instructions for Use
Place the two coils in the atomizer's deck
Tighten the wire legs in the appropriate anchor points
Trim the excess with wire cutters
Perform a few dry activations at low wattage (half of the recommended wattage) before inserting the cotton and verify that the coil's glow is even (see tutorial)
Place a generous amount of cotton inside the coils and cut it to size, positioning it properly
Moisten the cotton with e-liquid and perform a few activations of the coil to ensure proper operation
Close the atomizer and refill with e-liquid (for tanks)
Maintenance: Perform a dry burn (dry activation without cotton) every 20-30ml of vaporized e-liquid
Package Contents
2 x Interlock Fralien DL Coil Breakill's Alien Lab
All Breakill's Alien Lab ready-to-use resistors are available on Svapoebasta
On Svapoebasta, you can buy these and many other ready-to-use Breakill resistors for rebuildable atomizers online.