Vaporesso Gen Fit Kit 3ml cheek electronic cigarette
The Gen Fit Kit by Vaporesso is an entry-level electronic cigarette designed to offer a efficient, compact, and easy-to-use tool for those who are new to vaping and want to quit smoking once and for all; all with a focus on modern and elegant design.
This starter kit consists of two elements:
The box mod houses a built-in (non-removable) 1200mAh battery, which provides ample capacity for an average of two days of vaping, and is equipped with a 510 connector, so it can also be used with other electronic cigarette atomizerss. The button present on the mod needs to be pressed to activate the vaporization, but it can also be vaped without pressing any buttons, as the e-cig has automatic draw.
Another very useful feature of this mod is the ability to select one of the 3 different power levels available (3.0 - 3.3 - 3.5V), simply by clicking the button three times in a row: one lit LED is the minimum level, two is medium, and three is high. In this way, the circuit automatically sets the correct wattage based on the installed resistance, and the vapor produced varies in quantity, heat, consistency, and flavor depending on the chosen level.
The battery is charged with the supplied cable through the 1A USB-C port, and the colored LED on the top of the mod indicates the remaining charge level: green 70-100% - blue 40-70% - red below 40%.
The iTank M atomizer that completes the kit has a top refillable 3ml tank, an adjustable airflow ring (MTL cheek) located under the tank's glass, and is equipped with an interchangeable 510 drip tip. It is compatible with Vaporesso GTX coils, one of which is included in the package with a resistance of 1.2?, to be used in the range of 8-12W; different value coils can be purchased separately, which produce different vapor, allowing for better customization of one's vaping experience.
Like the box mod, the atomizer has a 510 connector, so it can also be used with other mods.
A beautiful e-cig, extremely easy to use, with a good number of customizations: the ideal device to start vaping!
Kit available in various colors.
Instructions for use
- Unscrew the atomizer's top cap and refill the liquid from the top until the tank is full
- Close the atomizer and wait at least 5 minutes before vaping, so that the cotton in the coil head is properly saturated
- Turn on the device by clicking the Fire button 5 times
- Select the desired power by clicking 3 times
- Adjust the airflow by using the ring at the base of the tank
- Vape by clicking the Fire button or by directly inhaling from the drip tip (automatic draw)
- To replace the coil: unscrew the atomizer from the bottom and change the worn-out coil head with a new one by rotating it inside its slot
Technical specifications of the Gen Fit Kit
- Construction materials: aluminum alloy, steel, and pyrex glass
- Kit dimensions: 27.6 x 19.1 x 122.1mm
- Capacity: 3ml
- Liquid refill: top fill
- Maximum power: 20W
- Battery type: built-in 1200mAh
- Connectors: 510
- Drip tip: 510
- Draw type: mouth-to-lung
- Automatic draw: yes
- Included coils: 1.2 Ohm
- Compatible coils: Vaporesso MTX Coil
- Charging port: USB-C
- Display: not present
Package contents
- 1 x Gen Fit Box Mod 1200mAh
- 1 x iTank M Atomizer 3ml
- 1 x MTX Coil 1.2? (8-12W)
- 1 x USB-C Cable
- 1 x User Manual
- 1 x Warranty Card
Buy Vaporesso electronic cigarettes on Svapoebasta
In the vape shop, you have a wide selection of Vaporesso electronic cigarettes: choose the one that suits you!
