Vapefly Alberich MTL RTA 4ml rebuildable atomizer for electronic cigarettes
The Alberich MTL RTA is a rebuildable atomizer for electronic cigarettes with a diameter of 22mm by Vapefly, designed to offer the best cheek vape thanks to a highly customizable, quiet and contrasted draw.
The model comes in the classic three colors SS, Gunmetal, and Black, with a stainless steel body and a 510 drip tip made of POM. The installed tank is the 3ml PEI one, while the spare one is made of 4ml Pyrex glass; the top cap opens with a quarter turn and allows for easy top filling.
Under the "plug" bell, the new generation deck is hidden, with two slots to accommodate the cotton that will be fed from the top through special drippers integrated into the upper section and hit by the airflow from under the coil, thus guaranteeing smooth, velvety vapor with excellent throat hit. The rebuilding process is simple and intuitive, with 4 screws available (only 2 are used, it is not a dual deck): when closing, the small notches on the bell must perfectly match the heads of the screws.
The highlight of the Alberich atomizer is its airflow control, which can be finely adjusted thanks to the AFC ring located under the tank (with single holes) and the 6 interchangeable airflow pins included in the package (0.8 - 1.0 - 1.3 - 1.6 - 2.0 - 2.5mm).
An atomizer that is visually well-kept, eclectic, and with excellent flavor production: try it to believe it!
Instructions for use
- Screw the atomizer onto a box mod with a 510 connection
- Unscrew the atomizer
- Rebuild with resistive wire and vape cotton or with a pre-made coil, like the one included in the package
- Cut the cotton flush and wet it with the desired e-liquid
- Reassemble the deck in reverse order and close the airflow holes
- Unscrew the top cap with a quarter turn
- Refill from the top and close
- Open the airflow holes, turn on the mod, set the vaping mode and/or wattage, and enjoy the vape
- To replace the airflow pins: use the included flathead screwdriver to unscrew the pre-installed pin under the atomizer and screw in the preferred one
- If you want to use the 4ml tank, you need to use the provided chimney extension
Technical specifications of the Alberich MTL RTA
- Type: rebuildable RTA atomizer
- Construction materials: stainless steel, PEI Tank, and POM
- Diameter: 22mm
- Liquid capacity: 3-4ml
- Inhalation type: mouth to lung
- Connector: 510
- Deck: single coil
- Airflow: under the coil
- Drip tip: 510
- Liquid refill: top fill
Package contents
- 1 x Alberich MTL RTA 3ml atomizer
- 1 x 4ml Pyrex Tank
- 1 x KA1 0.8 Ohm pre-built coil
- 2 x Cotton wicking strips
- 5 x Airpins
- 1 x 4ml tank adapter (chimney extension)
- 1 x Three-headed screwdriver
- 1 x Spare parts
- 1 x User manual
Buy Vapefly atomizers on Svapoebasta
Have you ever tried a Vapefly atomizer?
Take a look at the complete catalog and choose the one that suits you best!
Per chi dovesse averci a che fare per la prima volta è importante ricordare che la "campana" si sfila verso l'alto a pressione, non si evita.
Il tiro è molto arioso anche con il PIN da 0,8.
Io lo adopero da due giorni e forse il mio parere è ancora prematuro, ma se dovessi tornare indietro opterei per altro.3.
Naturalmente il mio è un personalissimo parere.