Svoemesto Kayfun Prime high-end rebuildable atomizer for electronic cigarettes - 2ml
The Kayfun Prime by Svoemesto is a high-end rebuildable mouth-to-lung atomizer made of high-quality stainless steel, characterized by exquisite craftsmanship and a precise and smooth draw.
It has a diameter of 22mm, features a 2ml borosilicate glass tank, and comes with a spare metal tank included in the package. The tank is filled from the top by unscrewing the top cap, and a safety system prevents leakage even if too much liquid is added. This was an issue with previous Svoemesto models.
The single coil deck with PEEK insulators is reminiscent of past Kayfun models but is smaller to accommodate pure MTL coils. It has a large under-coil airflow hole that covers the entire coil, preventing heat spikes and delivering full flavor. The reduced chamber also performs well with tobacco, fruity, and creamy e-liquids.
It also features a liquid flow control by rotating the tank and a convenient airflow adjustment mechanism. By pushing up the hexagonal ring below the tank and sliding it to one side, you can choose the most suitable airflow hole for your preferences among 1.0 - 1.2 - 1.4 - 1.6 - 1.8 - 2.0 mm. Afterwards, simply lower the ring back down.
The connector is a 510 type, making it compatible with a wide range of box mods.
A timeless and nostalgically charming atomizer that mouth-to-lung enthusiasts should not miss.
Instructions for use
- Screw the atomizer onto a box mod with a 510 connection
- Unscrew the tank
- Regenerate with resistive wire and vape cotton or with a pre-made coil
- Cut the cotton, insert the tips into the wicking slots, and saturate with the desired liquid
- Reassemble the tank in reverse, screwing it all the way to close the liquid flow to the vaporization chamber
- Unscrew the top cap, fill the tank, and close it
- Rotate the tank 2-3 turns to open the liquid flow to the coil, until some air bubbles are visible in the tank
- Adjust the airflow by raising the hexagonal ring under the tank, selecting the preferred hole, and lowering the ring to lock the mechanism
Technical specifications
- Type: rebuildable tank atomizer (RTA)
- Materials: stainless steel 316L, PEEK, borosilicate glass, and POM
- Diameter: 22mm
- Height: 45.5mm (without drip tip)
- Liquid capacity: 2ml
- Inhalation type: mouth to lung
- Connector: 510
- Airflow: 1.0 - 1.2 - 1.4 - 1.6 - 1.8 - 2.0 mm
- Drip tip: 510
- Liquid filling: top fill
Package contents
- 1 x Kayfun Prime Svoemesto Atomizer
- 1 x Stainless Steel Tank
- 1 x Spare Parts Bag
Buy Svoemesto atomizers on Svapoebasta
Have you never tried a Svoemesto atomizer?
Take a look at the complete catalog and choose the one that suits you!