Your cart
There are no more items in your cart
Coolfire Z60 Kit electronic cigarette by Innokin for mouth to lung and direct lung vaping.
Device composed of a Zlide TOP atomizer with 3ml top refill, adjustable top airflow and dual drip tip, and a 60W box mod with 510 connection, built-in 2500mAh battery, adjustable wattage and new vaping modes.
Compatible with Innokin Z Coil resistors, two of which are included in the package: 0.6 and 0.3 Ohm.
WARNING: the 0.6? coil requires a specific usage procedure to avoid premature burning, which you can find explained below.
- → Shipping from 9.90 € - info
- → Do you need help? Go to the help center
- → Phone support: +39 392 122 122 8 (Mon-Fri 9:00-12:45 / 15:00-18:00 CEST)
- → Information on warranty and assistance
Innokin Coolfire Z60 Kit electronic cigarette with Zlide TOP atomizer
The Coolfire Z60 starter kit from Innokin is a powerful and versatile electronic cigarette that can be used for both mouth-to-lung and direct-to-lung vaping. This innovative device features the so-called "fourth generation technology", which uses alternating current instead of continuous discharge, improving the flavor production and prolonging the life of the coil used.
The Coolfire Z60 mod is made of solid zinc alloy, has a built-in 2500mAh battery (quickly rechargeable via USB-C), a 510 tank that can accommodate atomizers up to 25mm without overhang, and a large color display. In addition to the classic modes with manual power adjustment up to 60W, this box offers Coil+, which ensures a longer coil life, and Refresh, which fixes the wattage at 40% of the set value and helps the coil absorb more e-liquid, resulting in a fuller and more flavorful vapor.
The Zlide TOP atomizer is the flagship of the kit and offers a 3ml tank with top fill system, adjustable MTL to RDL airflow through the top ring, and two interchangeable 510 drip tips, one for mouth-to-lung vaping and one for direct-to-lung vaping. Thanks to the placement of the AFC ring above the tank, maximum tank tightness is guaranteed even immediately after filling: so goodbye liquid leaks.
The device is compatible with Innokin's Z coils, two of which are included in the package: the new 0.6? (9-13W) dual mesh coil for mouth-to-lung vaping with a moderately restricted draw and drier vapor, and the 0.3? (30-40W) coil for airy direct-to-lung vaping with maximum vapor production. Depending on which coil is used, the manufacturer recommends installing one or the other drip tip. Read the procedure for correct use of the 0.6? coil below to avoid burning it immediately.
Efficient, technological and with a very elegant design: a complete kit in a modern style.
Instructions for use: 0.6? coil
- Unscrew the bottom part of the tank and screw it onto a box mod with a 510 connection
- Install the 0.6 Ohm coil without wetting the cotton and close the atomizer tightly
- Slide the top cap to access the refill hole
- Fill the tank up to 3ml of e-liquid and close it
- Wait at least 10 minutes for the coil cotton to saturate properly
- Turn on the device with 5 clicks
- Perform the first activations at 6W
- Strictly respect the maximum limit of 13W, with higher wattages the coil will burn immediately
- Adjust the airflow with the ring above the atomizer glass
- Install the preferred drip tip: wide for direct-to-lung or narrow for mouth-to-lung vaping
- Vape
Instructions for use: 0.3? coil
- Unscrew the bottom part of the tank and screw it onto a box mod with a 510 connection
- Moisten the cotton of the 0.3 Ohm coil, install it, and close it
- Slide the top cap to access the refill hole
- Fill the tank with up to 3ml of e-liquid and close it
- Wait at least 5 minutes for the coil cotton to properly saturate
- Turn on the device with 5 clicks
- Adjust the airflow by using the ring above the atomizer glass
- Install the preferred drip tip: wide for direct lung or narrow for mouth to lung
- Vape
Accessories and Spare Parts for Innokin Coolfire Z60 Kit
- Z Coil Resistance
- Coolfire Z60 Mod
- Zlide Top Atomizer
- Zlide Top Replacement Glass
Technical specifications of the Innokin Coolfire Z60 kit
- Construction materials: zinc alloy, stainless steel, and Pyrex glass
- Dimensions: 36.6 x 27.2 x 126 mm
- Maximum power: 60W
- Battery type: built-in 2500mAh
- Vaping modes: VW - VV - Coil+ - Refresh
- Inhalation type: mouth to lung and direct lung
- Airflow control: yes, top
- Charging port: USB-C
- Liquid capacity: 3ml
- Refilling: top
- Included resistances: 0.3 - 0.6 Ohm
- Compatible resistances: Innokin Z Coil
- Resistance range: 0.2?-3.5?
- Display: color
Package contents
- 1 x Innokin Coolfire Z60 box mod
- 1 x Zlide TOP 3ml atomizer
- 1 x 0.3? Z Coil
- 1 x 0.6? Z Coil
- 1 x Spare glass
- 2 x Drip tips (MTL - RDL)
- 1 x Spare O-rings bag
- 1 x USB charging cable
- 1 x User manual
- 1 x Warning sheet
Buy Innokin e-cigarettes on Svapoebasta
Take a look at the Innokin e-cigarettes catalog and choose the model that suits you best!
- Liquid Capacity
- 4 ml
- Category
- Electronic Cigarettes
- Brand
- Innokin
- Typology
- Complete Kit
Starter Kit - Battery Format
- 18650 is the model number of a type of lithium-ion rechargeable battery.
Integrate - Difficulty
- Middle
- Maximum Power
- 41-60W
- Type of Shot
- Cheek (MTL)
Lung (DL) - Diameter
- 24 mm
- Air regulation
- Adjustable shot
- Tank filling
- From above
- Battery
- Single battery (not included)
- Battery recharge
- External charger (not included)
USB-C cable - Visualizza
- Yes.
- Power adjustment
- Manual
- Type of Resistors
- Interchangeable head coil
No reviews
You might also like
Feedaty Reviews copy of Coolfire Z60 - Zlide TOP Complete 60W Kit
There are no reviews
Oppure contatta il nostro Staff qui.
Tap to zoom
