Dall'1 Gennaio 2025 non sarà più possibile acquistare online i prodotti contenenti nicotina come da decreto legislativo del 26 Settembre 2024 N. 141. Sarà invece possibile acquistare online tutti i prodotti e varianti che non contengono nicotina.
Verify Age
To browse the site you must be at least 18 years old. Verify your age before accessing the site.
18+ only. Product containing nicotine, a highly addictive substance. Use not recommended for non-smokers.
Recon Stapled prefabricated coil Breakill's Alien Lab line Bullets for flavour chasing RDL vaping.
Ready-made coils made with 5 wraps on a 2.5mm complex wire in Ni80: single coil resistance value 0.4? (35-45W), dual coil resistance value 0.2? (65-85W).
Complete and balanced aromatic yield, high reactivity, and perfect for long and cool pulls.
The Recon Stapled from the Bullets line by Breakill's Alien Lab are ready-made resistances for RDL, ideal to use on both single and dual coil rebuildable atomizers, allowing for installation on a wide range of RTA tanks and RDA drippers.
These complex coils are made with 5 wraps of Nichrome 80 wire on a 2.5mm rod and have a resistance value of approximately 0.4 Ohm (0.35 Ohm if half a coil is removed for installation). The recommended usage range by the manufacturer is 35-45W, while if used together in a dual coil deck, the resistance value drops to 0.2 Ohm and the recommended wattage increases to 65-85W.
These highly efficient and responsive coils guarantee long draws and fresh vapor. For a long-lasting lifespan, it is recommended to frequently maintain the coil with a dry burn every 10-20ml.
The Recon Stapled resistances are sold in an eye-catching bullet-shaped metallic packaging and contain 2 coils.
Technical Specifications
Type of draw: flavour chasing (RDL)
Material: Ni80
Number of wraps: 5
Internal diameter: 2.5mm
Resistance value: 0.4? single coil - 0.2? dual coil
Wattage range: 35-45W single coil - 65-85W dual coil
Recommended atomizers: RTA and RDA
Dry burn: every 10-20ml
Estimated lifespan: 150-250ml
Instructions for Use
Place the coil in the deck of the rebuildable atomizer
Tighten the two legs of the resistance in the appropriate anchor points
Trim the excess with wire cutters
Perform a few dry burns at a low wattage (half of the recommended wattage) before inserting the cotton and verify that the coils glow evenly (see tutorial)
Place a generous amount of cotton inside the coil and cut it to size, positioning it properly
Moisten the cotton with e-liquid and perform a few activations of the coil to ensure proper functioning
Close the atomizer and refill with e-liquid
Maintenance: perform a dry burn (dry activation without cotton) every 10-20ml of vaporized e-liquid
Package Contents
2 x Recon Stapled Coil Breakill's Alien Lab
1 x Metallic packaging
Buy the Ready-made Alien Coils on Svapoebasta
In the shop, you can find these and many other ready-made resistances for your electronic cigarette: take a look at the complete catalog and choose the ones that are most suitable for your vaping experience!
