Breakill's Spools Suprema Ratio Cloud Fused Resistive Wire for Complex Coils
The Cloud Fused Spool coil from Breakill's Alien Lab is a spool on which 2 meters of resistive wire Clapton are wound: a bundle of Nichrome 80 wires produced by Suprema Ratio, as thin as hair, expertly handcrafted by the Coil Builder artisan.
The result is a "braid" formed by a Core and a Wrap, to be wound in coils on a metal rod to create custom e-cigarette resistances, installable on rebuildable atomizers for Cloud Chasing (Direct Lung).
This wire offers great responsiveness and power for lung vaping, but its use is recommended only in Dual Coil configurations. Due to its structure, it is also possible to obtain extreme setups, suitable ONLY for parallel batteries or 21700 batteries.
The Cloud Fused Spool wire coils guarantee maximum cleanliness thanks to the double ultrasonic cleaning they undergo after assembly (which is done manually) and the metal case in which they are supplied.
Efficient, versatile, and without any residue from the manufacturing process: the best of the best for your RBA atomizers!
For experienced vapers: do not use excessively low setups on mechanical mods and with inadequate batteries.
Recommended Dual Coil Setups
4@ 3mm rod = 0.08?
5@ 3mm rod = 0.10?
6@ 3mm rod = 0.11?
4@ 3.5mm rod = 0.09?
5@ 3.5mm rod = 0.11?
6@ 3.5mm rod = 0.13?
Technical Specifications
Inhalation Type: Cloud Chasing (DL)
Material: Ni80
Linear Resistance: 2.7 ?/m
Recommended Atomizers: Cloud chasing RDA/RTA, diameter 24mm or larger
Instructions for Use
Cut a piece of Clapton wire to the desired length using diagonal pliers
Refer to the list of recommended setups to know in advance the resistance value in Ohms of the coil you want to assemble
Wrap the wire around a metal rod (coil jig) with the chosen diameter and number of wraps
Position the coils on the atomizer deck
Tighten the coil legs in the appropriate anchor points
Cut off any excess wire with the pliers
Perform a few dry burns at a low wattage (half of the recommended wattage) before inserting the cotton, and check that the coils glow evenly (see tutorial section)
Place a generous amount of cotton inside the coils, cut it to size, and position it properly
Moisten the cotton with e-liquid and activate the coils a few times to ensure they are functioning correctly
Close the atomizer and refill with e-liquid (if necessary)
Maintenance: perform a dry burn (firing the coils without cotton) every 15-20ml of vaporized e-liquid
Breakill's Spools Tutorial
Package Contents
1 x Cloud Fused Spool Breakill's Alien Lab 2m
1 x Metal case
Buy Breakill's resistive wires on Svapoebasta
In the shop you can find all the products for regenerating Breakill's Alien Lab: take a look at the complete catalog and choose between prefabricated coils and artisanal resistive wires made in Italy!