Tactical Multicore pre-made coil by Breakill's Alien Lab line Bullets for RDL flavor chasing vaping.
Ready-made coils made with 5 wraps on 2.5mm complex wire in Ni80: single coil resistance value 0.25? (45-60W), dual coil resistance value 0.12? (95-120W).
Energetic and full aromatic yield, high reactivity and high vapor production.
The Tactical Multicore from the Bullets line by Breakill's Alien Lab are ready-made resistors for RDL, ideal to use on both single and dual coil rebuildable atomizers, allowing them to be mounted on a wide range of RTA tanks and RDA drippers up to 24mm in diameter.
These complex coils are made with 5 wraps of Nichrome 80 wire on a 2.5mm rod, and have a resistance value of approximately 0.25 Ohm. The recommended wattage range by the manufacturer is 45-60W for single coil use, and it increases to 95-120W when used in dual coil configuration, as the resistance value drops to about 0.12 Ohm.
This reactive coil ensures a fantastic vapor production, more energetic than the Recon and more suitable for high wattages. For a long-lasting lifespan, it is recommended to perform a dry burn every 15-30ml.
The Tactical Multicore resistors are sold in an attractive bullet-shaped metal packaging that contains 2 coils.
Technical Specifications
Draw type: flavour chasing (RDL)
Material: Ni80
Number of wraps: 5
Inner diameter: 2.5mm
Resistance value: 0.25? single coil - 0.12? in dual coil
Wattage range: 45-60W single coil - 95-120W in dual coil
Recommended atomizers: RTA and RDA up to 24mm
Dry burn: every 15-30ml
Estimated lifespan: 150-300ml
Instructions for Use
Place the coil in the rebuildable atomizer deck
Tighten the two legs of the resistor in the appropriate anchor points
Trim the excess with wire cutters
Perform several dry activations at a low wattage (half of the recommended wattage) before inserting the cotton and check that the glow of the wraps is uniform (see tutorial)
Place a generous amount of cotton inside the coil and cut it to size, positioning it properly
Moisten the cotton with e-liquid and perform a few coil activations to verify its proper functioning
Close the atomizer and refill with e-liquid
Maintenance: perform a dry burn (dry activation without cotton) every 15-30ml of vaporized e-liquid
Package Contents
2 x Tactical Multicore Coil Breakill's Alien Lab
1 x Metal packaging
Buy ready-made Alien coils on Svapoebasta
In the shop, you can find these and many other ready-made resistors for your electronic cigarette: take a look at the complete catalog and choose the ones that are most suitable for your vaping!